Order by email: info@toiletrevolution.com credit cards
Email Us: info@toiletrevolution.com Call Us: UK: 01268 919 001   |   IRE: 086 888 5542

Incinerating Toilets

Flame 8000 Incinerating Toilet - AC Electric - Incinerating - Self Contained

Price: £3,250 inc. VAT | €3,892 inc. VAT    

£3,250 inc. VAT BUY NOW

The Flame 8000 incinerating toilet was launched in 2012 and updated in 2015 and 2017. Simple and safe to use, the Flame 8000 needs no liquid outlet. All the waste is incinerated to vapor leaving a small amount of sterile ash residue. The Toilet Revolution Flame 8000 pack comes with the air inlet device which allows fresh air into the room while incineration is in progress. This extends the life of the heating element in the incinerating toilet. It ensures that the unit has enough air to cool the heating element. The pack also includes a wall mounted bowl liner dispenser. We supply these as standard as they are required to run the unit long term. Improvements in the 2015 model are thicker metal in the combustion chamber, improved catalytic converter for lower emissions and its easier to empty the ash pan. Separett Flame Quick Guide:

  • Pack includes £150 worth of extras as standard (1000 bowl liners, cleaning kit, bowl liner dispenser, cowl & air inlet and cleaning kit)
  • Place bowl liner before each visit – WATCH THE USER VIDEO
  • Energy use is 0.4kw – 1.7kw per visit – contact us for cost estimator sheet
  • 45 min program for solids 550 deg
  • 10 min program evaporates urine 550 deg
  • Fan program, to expel shower condensation
  • Capacity 6 people and emptying the ash box each week
  • 3 people can use the toilet after each other, then allow 60 min cooling unitl the next burn
  • Toilet can be used by a 4th person during incinerating cycle
  • Everyone should sit when using the Flame
  • Often used in conjunction with Separett Pee Unisex waterless urinal to lower electricity usage
  • 28kgs
  • 3 Year guarantee
  • Download the Separett Flame Manual and watch installation video and fuse change video

Flame-8000-1
Flame-8000-2The internal fan will quietly and effectively removes odors and moisture from the toilet and bathroom. Ventilation duct run straight through an exterior wall.

Separett Flame 8000 has no requirement for room temperature, but works in both cold and warm space. It can be placed as desired and need not be attached to the wall or floor.

The built-in controller makes it possible to use two different programs, thereby enabling an energy efficient combustion of the waste.

The ash that is removed is safe to use in the garden.

Emptying the ash box

  • Open the hatch in the front of the toilet by loosening the locks
  • on the sides
  • Pull the front off
  • Turn the ash box to the left
  • Pull out the ash box
  • Empty the ash box

Replacing the ash box

  • Check that the track in the ash box is towards the handle
  • Place the ash box into the slot and slide in
  • Turn the ash box to the right so that the ash box is sealed

 

 

 

 

 

Material Upper Polystyrene, Vanity White lacquered galvanized sheet, inner stainless steel
Material Seat High Gloss Polypropylene, Ash tray Stainless steel
Heating Element 240v, 1.8 kW
Energy 0.4 to 1.7 kW / Visit
Electrical Cable 1.9 m, grounded plug (10 amp fuse recommended)
Sound Level  55 dB(A)
Max Load  150 kgs
Package Size  77cm x 46cm x 73cm (L x W x H)
Package Weight  42Kgs
Toilet Size  39.5cm x 53.5cm x 63.5cm (W x H x D)

Flame1-__H Flame2-__H

 

 

 

 

Separett Flame takes in about 150m3 per hour during the incinerating process so it is vital to install the air inlet air inlet we provide. It is also imperative to install the cowl we provide at the end of the pipe as this is designed to maximise cooling. Another key installation point is to have 100mm space between the back of the toilet and the wall. Please follow the flame installation instructions carefully as failure to do so will mean the manufacturer will void the warranty. Please contact us if you are unsure about anything before you proceed.

Venting can be done through a wall or ceiling with a maximum of 6 meters pipes 110mm diameter and 1 90 deg or 2 x 45 bends.

Should Separett Flame be used during the winter it is recommended to insulate the pipe to its full length. There is two reason to insulate the ventilation pipe:

  1. To minimise condensation caused by the warm air coming from the toilet hitting the cold vent pipe. If the pipe is insulated it will minimise condensation.
  2. To avoid cold air dropping through the ventilation pipe into the room.

So the insulation doesn’t affect the incineration of the waste no matter what the ambient temp outside is. Incoming air is by 160mm valve through the outer wall either down at Separett Flame or up at the ceiling.

The diagram below illustrates 3 installation options:

Bowl Liners x 2000

Bowl liners for the Flame 8000 Waterproof for 30min 500 pieces per pack Price includes 4 packs of 500 liners …...Read More...

Roof Flashing

Roof flashing pack contains 1pc*75mm hose clamp together with 1pc*110mm. For tarred or tiled roof. Made of EPDM-rubber. Used to …...Read More...

Cowl

Used at the end of the Flame 8000 vent outlet Metal Diameter Ø110 mm Included with the unit as standard ...Read More...

 

Air Inlet

The air inlet allows air into the room during the incinerating cycle. The inlet is installed in an external wall, …...Read More...

 

Holder – Bowl Liners

Wall mounted holder for bowl liners. Holds about 200 pieces...Read More...

 

Flame Cleaning Kit

Cleaning kit for the Flame 8000. Included with the Flame pack as standard....Read More...

Please leave this field empty.

Is the toilet going to be used all year round? YesNo

Do you have AC power? YesNo

Is your property single story? YesNo

Is there space below floor for a composter? YesNo

Toilet Revolution ( PB Horizon Ltd )   |   Company No. 516638   |  
Google+ Instagram LinkedIn Pinterest Tumblr YouTube
Site Design by Hilmon Arts