Wostman Eco Dry Porcelain Separating Compost Toilet - AC or DC - Urine Diverting - Split System

The Wostman Eco Dry composting toilet system is molded to divert urine and allow solids to fall into the container below. The product is vented from the container below. The button at the back of the toilet, behind the lid,  is a micro flush which if connected to mains (½”) will flush 100 ml – 200 ml of water. The flush mechanism uses 9 volt power. The flush is for the urine section only. You can “flush” this manually with a cup of water from the tap if you prefer.

Included as standard

• Soft close toilet seat
• Urine pipe
• 50 mm to 32 mm reducer
• 9 V Battery or Transformer (plug in) for the flush valve
• 14 Watt Fan (230V) or DC version
• 200 mm (diameter) 750mm length drop pipe and mounting brackets

Not Included

• Ballofix / stop cock for the water connection
• 75 mm diameter vent pipe
• You may choose to place the container on a wheeled trolley (suitable for 200 Kgs)

When the time comes to empty the container. Lift the lid on the container up along the shaft of the downpipe. The down pipe does not move as it is attached to the porcelain toilet, but the lid can slide up the shaft of the container. The container can slide out for removal while you gently put the lid down.

Product Details
Height	450 mm
Width	395 mm
Depth	580 mm
Drop shaft diameter	200 mm
Urine outlet Diameter	50 mm
Water connection diameter	12 mm (1/2″)
Weight	32 Kg
Colour	White
Material	Porcelain

Chose the correct location for the composting toilet system. Ensure that you are not directly over a joist and that no pipes or cables are in the way.

x

x

x

x

x

x

Mark the holes in the floor and cut to size.

x

x

x

x

x

x

x

Mount the 200 mm diameter drop pipe.This should stick up out of the floor about 170 mm. Let it extend as far down as the container below is located. Ensure the pipe can be moved to facilitate the container being emptied. Fix the 200 mm pipe to the floor using the metal angle mount. Seal any gap between floor and pipe with silicone (not supplied).

x

x

x

x

x

Install the 50 mm diameter urine drain through the floor and into the urine container.

x

x

x

x

x

x

x

x

Attach the urine hose to the floor so that it does not move around.

x

x

x

x

x

x

Place the toilet pedestal over the 200 mm pipe and seal the base using wetroom glue (not supplied).

x

x

x

x

x

Add the seal strip provided between the 200 mm drop shaft and the porcelain. This seal ensures that venting works correctly.

x

x

x

x

x

x

x

Connect the water supply to the toilet if available. Note that this will dilute the urine in the container which will reduce the need for further dilution. It will also make result in filling the container faster.

x